Sinrace Power Supply Technology (Shenzhen) Co., Ltd.
为什么选择鑫锐斯？
您选择了我们：可获得什么样的实际优势?
我们是有多年历史的专业电源制造商，我们随时保持以您提供电源技术方面的解答和热诚服务，我们的团队主要责任是把重点放在不断去满足客户的需求。也是我们彼此能建立长久战略合作信赖的伙伴关系！以下是我们几点实际优势:
- CRM完善的客户服务系统！
- 10年以上电源研究制造历史！
- 先进的制造设备和高效率生产流程！
- 具有存熟的设计方案可确保安全稳定！
- 严格的品质管控！
资质认证
| Knowledge LED drive power supply |
 |
 |
 |
|
LEDs are driven by DC current, so power and the LED in the city will need an adapter between the LED drive power. Its function is to convert into a suitable AC power LED's current. According to the electricity grid rules and LED driver feature requirements, selection and design of LED drive power to take into account the following:
1. Especially as high-reliability drive power LED street lamp, mounted on the upper, convenient repair and maintenance cost is also large. 2. LED is a high-efficiency energy-saving products, driving higher power efficiency. Installed in the fixture for the power structure, is particularly important. Because the LED luminous efficiency with LED temperature decreased, so the LED's heat is very important. High efficiency power supply, its power loss is small, the heat in the fixture on the small temperature rise will reduce the lamp. LED light on the slow decline favorable. 3. High Power Factor Power factor is the power to the load requirements. 70 watts under normal use of electrical appliances, there is no mandatory targets. Although not a single power with a lower electrical power factor has little effect on the power grid, but at night we light lamps, the same load is too concentrated, would produce power more serious pollution. 30 watts to 40 watts for the LED drive power, it is said in the near future, perhaps there would be power factor requirements of certain indicators. 4. Drive is now prevailing in two ways: One is more than a constant voltage source for constant current source, each constant current LED power supply individually to each road. In this way, the combination of flexibility, all the way LED failure does not affect the LED's work, but the cost will be slightly higher. The other is a direct constant current power supply, LED series or parallel operation. It has the advantage of lower cost, but flexibility is poor, but also to resolve a fault LED, LED operation does not affect other issues. These two forms coexist in a period of time. Multi-channel constant current output power supply, cost and performance will be better. Perhaps the main direction of the future. 5. Surge protection LED surge capacity is relatively poor, especially the anti-reverse voltage capability. Enhance this protection is also very important. Some LED lights installed in the outdoors, such as LED lights. Since the start grid load rejection and lightning sensors, a variety of intrusion from the grid system will surge, the surge can cause some damage to the LED. LED drive power should therefore inhibit the surge of the invasion to protect the LED from damage ability. 6. Protection in addition to the conventional power protection, the best increase in the constant current output LED temperature feedback, to prevent the LED temperature is too high. 7. Protection aspects of lighting and outdoor installation type, the power structure should be waterproof, moisture, shells and Fast. 8. Drive power of life compared with the LED's life fit. 9. To comply with safety regulations and electromagnetic compatibility requirements. |
